Aggregate Cleaning & Sealing Service in Louisville KY
Your Aggregate Driveway Experts
Aggregate Requires Top Care
HurriClean Pressure Washing & Sealing provides professional exposed aggregate cleaning and sealing throughout Louisville, Middletown, Jeffersontown, Prospect, Goshen, and surrounding areas.
We use commercial-grade hot-water cleaning equipment, professional cleaning solutions, proven preparation methods, and a professional 30% solids acrylic sealer that is carefully rolled onto the surface to restore, enhance, and protect exposed aggregate driveways, patios, sidewalks, pool decks, porches, and decorative concrete surfaces.
If your exposed aggregate has become dirty, faded, stained, or weathered, get in touch with the experts at HurriClean today!
Not Just for Driveways!
Our Exposed Aggregate Cleaning and Sealing Service is also ideal for:
Not Just for Driveways!
Our Exposed Aggregate Cleaning and Sealing Service is also ideal for:
- Aggregate Patios
- Aggregate Walkways
- Aggregate Sidewalks
- Aggregate Porches
- Aggregate Pool Decks
- Outdoor Living Areas
- Decorative Concrete Surfaces
- Garage & Shop Floors
HurriClean 9-Step Aggegrate Cleaning & Sealing Process
for Exposed Aggregate Concrete
Results & protection like this can only be achieved by following strict guidelines for exposed aggregate inspection, prep, cleaning, and sealing. No skimping or shortcuts, just detailed, professional aggregate cleaning & sealing workmanship and service designed to provide optimal results for your driveway, sidewalk, patio, porch, or pool deck.
See below for a detailed step-by-step breakdown of our Exposed Aggregate Cleaning & Sealing process!
Results & protection like this can only be achieved by following strict guidelines for exposed aggregate inspection, prep, cleaning, and sealing. No skimping or shortcuts, just detailed, professional aggregate cleaning & sealing workmanship and service designed to provide optimal results for your aggregate driveway, sidewalk, patio, porch, or pool deck.
See below for a detailed step-by-step breakdown of our Exposed Aggregate Cleaning & Sealing process!
Step 1
Inspect Exposed Aggregate
Before cleaning begins, we inspect for loose aggregate, cracks, stains, oil spots, old coatings, surface damage, and drainage issues. Every exposed aggregate surface is different, so we determine the proper cleaning and sealing approach before beginning the project.
Step 2
Protect Surrounding Areas
Before cleaning solution application, precautions are taken to protect nearby landscaping, siding, garage doors, painted surfaces, entryways, and surrounding areas. This helps to ensure our aggregate cleaners & sealer will only touch the intended surface.
Step 3
Pre-Treat the Aggregate
A pre-treatment cleaning solution is applied to loosen dirt, mildew, algae, organic growth, auto residue, and contaminants embedded in the aggregate. This allows our surface cleaning equipment to work deeper and more evenly without relying on excessive pressure.
Step 4
Hot-Water Surface Cleaning
Hot water beats cold water every time for loosening and breaking down stubborn dirt, grease, oil residue, grime, and contaminants. We use our commercial-grade surface cleaner to provide consistent results across the entire surface – with no risk of aggregate damage.
Step 5
Inspect, Post-Treat & Rinse
After the primary cleaning process, we inspect the surface for areas that require extra attention. A post-treatment may be applied to address remaining organic discoloration and achieve a cleaner, more uniform appearance. This is followed by a thorough rinse.
Step 6
Allow to Dry Completely
Proper drying is extremely important before applying an acrylic sealer. Dry time can vary based on temperature, humidity, shade, recent rainfall, airflow, and the aggregate’s condition. We allow the exposed aggregate adequate drying time so the sealer can bond properly.
Step 7
Final Surface Preparation
Before sealing, we perform another surface inspection and remove any remaining dirt, debris, or contaminants. The exposed aggregate must be completely clean, dry, and properly prepped so the acrylic sealer can achieve its full potential for aesthetics and durability.
Step 8
Apply Penetrating Sealer
After final prep work is complete, we apply a professional-grade 30% solids acrylic concrete sealer. To ensure complete coverage, we roll it on, rather than spray it on. Rolling allows us to control the amount of sealer being applied and work it evenly across the textured surface.
Step 9
Allow Sealer to Cure
After sealing, proper time is required to cure. During the curing period, it should remain free from vehicle & foot traffic, water, and anything the sealer manufacturer cautions against. HurriClean provides clear instructions on when the aggregate can safely resume regular use.
At-A-Glance: Benefits of Aggregate Cleaning & Sealing Service
- Removes abrasive dirt, dust, and debris
- Lifts away stubborn stains like oil & grease
- Targets & kills embedded organic growth
- Enhances the aggregate’s natural colors
- Transforms dull & faded to rich & vibrant
- Helps protect against spills & staining
- Adds a barrier against weather exposure
- Reduces penetration of salt & contaminants
- Makes future cleaning & maintenance easier
- Protects the surface from everyday wear
- Achieves a luxurious “wet” look
We Seal & Protect Many Exterior Surfaces for Louisville, KY Homes
The porous and absorbent nature of your exterior concrete, brick and stone surfaces leaves them wide open to a wide range of structural issues. HurriClean can help you protect your investment and dramatically lengthen the lifespan of your concrete surfaces!
We Clean, Seal & Protect:
• Driveways
• Sidewalks
• Patios & Porches
• Pool Decks
• Foundations
• Exposed Aggregate
• Garage Floors & more!
Sealing Protects Against:
• Stains & Discoloration
• Moisture Absorption
• Premature Cracking
• Structural Warping
• Pitting & Spalling
• Freeze/Thaw Cycles
• Salt Damage & more!
We Offer Several Sealing Solutions
Sealant Types Available
CONCRETE GRADE PAINT:Â Perfect for exterior surfaces like porches, patios or foundations not subject to vehicle traffic, but where a specific color is desired.
EPOXY COATING: An attractive choice for garage floors subject to vehicle traffic. Colors, styles and finishes available.
ACRYLIC COATING: Gives surfaces that luxurious “wet” look. Ideal for interior concrete such as gameroom floors and finished basement floors. Excellent longevity and stain prevention.
A Louisville, KY Tradition of Exterior Cleaning Excellence Since 2005
HurriClean has been Louisville’s most trusted Exterior Cleaning Company for more than two decades. We provide Pressure Washing, Soft Washing, and Sealing services for Residential, Commercial, and Multi-Unit clients across eastern Louisville, KY and surrounding suburbs.
Not sure if we service your area? Feel free to contact us to find out. We can travel beyond our primary service area for large commercial and multi-unit projects.
More Great Ways to Protect & Beautify Your Louisville, KY Property:
Our safe House Soft Washing service in Louisville, KY makes it so easy to keep your home exterior in Prospect, Goshen, or Anchorage looking fresh, clean and beautiful all year round!
Our gentle Roof Soft Washing treatments go easy on your Louisville home’s shingles, but hard on algae stains & streaks. Also available in Prospect, Goshen, Anchorage, & beyond!
Professional Driveway Pressure Washing should be a regular home maintenance service for homeowners in Louisville, KY and areas like Mt. Washington and even as far as Taylorsville.
Discover why property managers in Louisville & Kentuckiana love HurriClean! We offer multi-unit property exterior cleaning services for apartments, condos and townhomes.
Call Now for Your FREE Quote:
502-664-1589